Products
Contact us
Cixi Jusen Metal Products Co., Ltd.

Contact Person : MS YUKI
Tel : 0086-574-63699949
Fax : 0086-574-63698997
Mobile : 0086-13858310878

QQ : 179549927
Email : nansencoppery@163.com

Address : NO.99, 2ND QUHENG RD, NORTH INDUSTRIAL PARK, XIAOLIN TOWN, CIXI CITY, NINGBO, CHINA
Zip : 315321
WebSite : www.nansencoppery.com


SLIDE PEX SYSTEM
You are here: Home >> SLIDE PEX SYSTEM

滑紧式管件.jpg

Jusen slide system is suitable for use both pex pipe and pex-al-pex pipe for water and gas.

All fittings are made of DZR brass and comply with Australian Standard AS/NZS 2537.

It is a easy jointing system. It can be installed very quickly by specialized tools. 

The slide system is the most cost effective pipe system in the market.

Installation instructions

1.jpg

1.Cut pipe

To Start the installation, the cut is very important part of the finished joint.

The cut must be clean and square, all measurements between fittings should be measured shoulder and shoulder.

2.jpg

2. Pipe expansion

Slide the compression sleeve over the pipe,with the bevelled end facing the fitting being connected.

Commence expanding the pipe by pulling the handle of the expanding tool as far as possible withoutstraining or excessive force. Rotate pipe a few degrees and repeat the expansion process.


3.jpg

3.Completion of the joint

Place the fitting into the expanded pipe until the pipe reaches the pipe stop on the fitting.

And slide the compression sleeve towards the fitting.

parallet within the jaws of the slide tool.Srew down the tool handle clockwise, the joint is completed when the compression sleeve reaches the shoulder of the fitting.

Home | About us | Products | News | Download | Feedback | Contact us

Copyright    Cixi Jusen Metal Products Co., Ltd.  Powered by Yishang Network.Inc